 |
| Contact us |
|
 |
| |
 |
Hotline:
+86-576-87243021 |
Fax:+86-576-87243021
P.C.:317600
Address: No. 70 Yongqing Road, Marine Economic Development Zone, Yuhuan City, ZheJiang Province, China.
E-mail：sales@forkliftparts.cc |
|
 |
|
|
 |
News Details |
 |
| |
The use of the composition and function of the clutch
|
|
According to informed Chengguan forklift truck parts , clutch generally active part consists of four parts , the driven part , pressed bodies and control mechanism and other components.
Which includes the active part of the flywheel , clutch housing and gland ; driven section includes follower plate and the driven shaft ; clamping mechanism includes a compression spring operating mechanism includes a release lever , separate housings, bearings, separate fork , return spring , pedals and adjust the lever.
When the clutch engaged, the torque of the engine by the crankshaft broke, driven by the friction disk drive through the flywheel and pressure plate , and then passed through a transmission driven shaft .
When the pedal is depressed , by adjusting the rod, separate fork and release bearing seat belt release bearing , separating the inner end of the lever toward the left , since the middle of the pillars separating the clutch lever is based on the shell as a fulcrum , and the outer end of the pressure plate is hinged , so the pressure to overcome the compression spring , pulling the pressure plate moves to the right . Thus , the pressing force on both sides of the driven plate disappears friction disappears , the transmission torque of the engine is no longer passed , the clutch is in the disengaged state.
When you release the pedal, the pedal return to its original position, release bearing seat is pulled to the right of the return spring . At this compression springs and push the pressure plate from moving plate is pressed against the flywheel , engine torque and the incoming transmission. |
| |
| >> Return to the previous one |
|
| |
|
